Send E-mail
Send SMS
Home»Products & Services»

Special Purpose Machine - SPM

Our range of products include pipe cutting machine, pressure sensor calibration check setup, pipe closing machine - 3 station, backrest durability test, sample fabric pasting machine and thermostat test set up.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 8.7 Lakh  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
ModelSPM-122
Capacity4 Pipe at a time
Pipe Size16 - 28 mm Dia
Cutting BladeDia. 275,2 mm thick
Power Supply3 Phase
Cutting Speed1450 - 2880 RPM
Warranty1 Year
Voltage415 Volt
Place Of OriginPune
BrandEEE
MaterialMild Still
Machine Layout(2.5 L x 1.1 W x 1.5 H )mtr

Additional Information:
  • Item Code: SPM-122
  • Delivery Time: 6-8 weeks


Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 No
Calibration IntervalYearly
Usage/ApplicationIndustrial
Calibration Service LevelNA
Calibrated ForManufacturer
Number of Units6 Station
Brand/ModelEEE
Industry TypeManufacturer
Specification : 
  1. Sump tank – SS  – 75 Ltr.
  2. PLC – Delta
  3. Analog Card – for level input – 6 channel
  4. HMI – 7”
  5.  Frequency measurement card – 06Nos.
  6.  Annunciator for accept near sensor nest
  7.  Submersible level transmitter for level measurement – Accuracy - 0.5 % FS
  8. Data log to SD card / pen drive

Additional Information:
  • Item Code: SPM-112
  • Delivery Time: 08 - 10 weeks
Yes! I am Interested
REQUEST CALLBACK
  • Pipe Closing Machine - 3 Station
  • Pipe Closing Machine - 3 Station
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 Number
UsageIndustrial, Commercial
Operation ModeAutomatic, Semi-Automatic
TypeSpecial Purpose Forming Machine, Pipe / Tube end closing machine
Model NumberSPM-106
OrientationHorizontal
ColorPepsi Blue
BrandEEE
Automatic GradeManual
MaterialSteel / Copper pipe


Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
BrandEEE
Model No.SPM-16
Type of Testing MachinesBackrest Durability For Chair Testing As Per BIFMA Standard
GradeAutomatic
The purpose of this Backrest Durability Test is to evaluate the ability of the chairs to withstand fatigue stresses and wear caused by rearward force on the backrest of the chair.

Specifications:

  • The chair to be placed on the platform and restrained form movement
  • Mark the points of 406mm and 452mm above the seat on vertical center line of the backrest
  • For seats with backrest pivot greater than 300, a weight of 102kg shall be secured in the center of the seat
  • The loading device to be adjusted for 44.5 Kg total force to the backrest
  • The loading device shall be set for cycle rate in between 10-30 cyl. / min
  • For chairs with backrest width less than 406mm at the height of the loading point

Additional Information:
  • Item Code: SPM16
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandEEE
Automation GradeSemi-Automatic
ModelSPM-115
ConditionNew
 a)    Roll width – 750mm

b)    Programmable paper feed setting

c)    Ref light for pasting

d)    Main roller with Teflon coated follower roller

e)    PLC with HMI

Stepper motor with gear box 

Additional Information:
  • Item Code: SPM-115
  • Delivery Time: 6-8 weeks
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandEEE
ModelSPM-68
Display TypeDigital

Thermostat Test Setup (10 Parts)

1. Controlled Heating Rate 10/min

2. Controlled Cooling Rate 10/min

3. Cycle start temp 750

4. Max temperature settable

5. Dial Gauge with serial o/p.

6. Oil tanks with stirrer and heater

7. Water cooling coil

8. Sump tanks with cooler and pump.

9. Test fixture – 10 Nos.

10. PC interface

Data analysis / Reporting on computer.

Additional Information:
  • Item Code: SPM-69
  • Delivery Time: 8 weeks
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
BrandEEE
To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of Hot and Cold Test Machine.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandEEE
MaterialPolypropylene
Air Pressure1.5 to 2 bar

This machine provides the controlled corrosive environment which has been utilized relative corrosion resistance information for specimens exposed in given test chamber.

· The apparatus required for the salt spray (fog) exposure consist of a fog chamber, a salt solution reservoir, a supply of suitably conditioned compressed air, one or more atomizing nozzles, specimen supports, provision for heating the chamber, and necessary means of control.

· Drops of solution which accumulate on the ceiling or cover of chamber shall not be permitted to fall on the specimens being exposed.

· Drops of solution which fall from the specimens shall not be returned to the solution reservoir for re-spraying.

· Material of construction shall be such that it will not affect the corrosiveness of the fog.

· The specimens shall not contact each other or any metallic material or any material of acting as a wick. Each specimen shall be placed to permit exposure to the fog.

· Salt solution from one specimen shall not drip on any other specimen.


Additional Information:
  • Item Code: SPM-66
  • Delivery Time: 6-8 weeks
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandEEE
MaterialStainless Steel
Automation GradeAutomatic

Radiator cap testing machine is used to test the pressure withstanding and holding capacity of the radiator cap. it also measures the leakage pressure at predetermined time. Silent features and working of machine is as follows:

·        The frame is made of corrosive resistant SS (304 grade) material with strong base and support.

·        1 phase, 240V AC supply is given to all the electrical devices.

·        All pneumatic devices works on compressed air which is supplied by a compressor.


Additional Information:
  • Item Code: SPM-113
  • Delivery Time: 6-8 weeks
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandEEE
ModelSPM-78

Additional Information:
  • Item Code: SPM-78
  • Delivery Time: 6-8 weeks


Yes! I am Interested
X
 

Download Brochure
Explore more products
Kaplan Turbine Test Rig
Get Best Quote
Francis Turbine Test Rig
Get Best Quote
Tilting Flume
Get Best Quote
Drop Test
Get Best Quote
Equilibrium Of Forces
Get Best Quote
Eternal Engineering Equipment Private Limited

Yash Y. Sapate
Gat No. 382, Mankarwadi Road, Urawade, Taluka Mulshi
Pirangut, Pune - 412115
Maharashtra, India
Send Email
© Eternal Engineering Equipment Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited